Kia Soul (SK3): Light bulbs / Position lamp/DRL/Front turn signal lamp bulb replacement (Type A, B)

Kia Soul (SK3) 2020-2025 Owners Manual / Maintenance / Light bulbs / Position lamp/DRL/Front turn signal lamp bulb replacement (Type A, B)

Kia Soul. Position lamp/DRL/Front turn signal lamp bulb replacement (Type A, B)

1. Open the hood.
2. Remove the bulb socket-connector by turning it counterclockwise.
3. Remove the bulb from the lamp assembly.
4. Install a new bulb.
5. Connect the bulb socket-connector.

Headlamp bulb

Kia Soul. Position lamp/DRL/Front turn signal lamp bulb replacement (Type A, B)

WARNING

Halogen bulbs

  • Halogen bulbs contain pressurized gas that will produce flying pieces of glass if broken.
  • Always handle them carefully, and avoid scratches and abrasions. If the bulbs are lit, avoid contact with liquids. Never touch the glass with bare hands. Residual oil may cause the bulb to overheat and burst when lit. A bulb should be operated only when installed in a headlight.
  • If a bulb becomes damaged or cracked, replace it immediately and carefully dispose of it.
  • Wear eye protection when changing a bulb. Allow the bulb to cool down before handling it.

    If the Headlamp (High/Low) (1) does not operate, have your vehicle checked by a professional workshop. Kia recommends to visit an authorized Kia dealer/service partner.

    If the position lamp + DRL (LED) (1) does not operate, have your vehicle checked by a professional workshop. Kia recommends to visit an authorized Kia dealer/service partner.

    Other information:

    Kia Soul (SK3) 2020-2025 Owners Manual: Changing tires

    1. Park on a level surface and apply the parking brake firmly. 2. Move the shift lever into R (Reverse) with Manual Transmission or P (Park) with Automatic Transmission/ Dual Clutch Transmission/ Intelligent Variable Transmission. 3. Activate the hazard warning flasher.

    Kia Soul (SK3) 2020-2025 Owners Manual: Tailgate room lamp replacement

    1. Using a flat-blade screwdriver, gently pry the lens cover from lamp housing. 2. Remove the bulb by pulling it straight out. 3. Install a new bulb in the socket. 4. Align the lens cover tabs with the lamp housing notches and snap the lens into place.

    Categories

     
    Copyright © 2026 www.ksoulsk3.com - 0.0098