System description
Rear Crosstraffic Collision Warning (RCCW) system

Rear Cross-Traffic Collision Warning (RCCW) System uses radar sensors to monitor the approaching cross traffic from the left and right side of the vehicle when your vehicle is in reverse.
The blind spot detection range varies relative to the approaching vehicle speed.
Rear Cross-traffic Collisionavoidance Assist (RCCA) system
Rear Cross-Traffic Collision-Avoidance Assist (RCCA) System monitors approaching cross traffic from the left and right side of the vehicle when your vehicle is approaching.
Rear Cross-Traffic Collision-Avoidance Assist (RCCA) System may activate the Electronic Stability Control (ESC) in accordance with a colliding possibility with an approaching vehicle. It is to lower the colliding risk or mitigate the colliding damage.
WARNING
Operating conditions The indicator on the switch will illuminate when the BCW button is pressed with the engine start/stop button ON. If the vehicle speed exceeds 30 km/h (18.
System setting The driver can activate the systems by placing the ignition switch to the ON position and by selecting "User Settings Driver assistance Blind-spot safety Rear Cross- Traffic Safety'.
If your temperature gauge indicates overheating, you will experience a loss of power, or hear loud pinging or knocking, the engine is probably too hot. If this happens, you should: 1. Pull off the road and stop as soon as it is safe to do so. 2.
1. Remove the lamp assembly by using a flat-blade screwdriver. 2. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly. 3. Remove the bulb from bulb-socket by pulling it out.