
If any method other than the cruise / CRUISE button was used to cancel cruising speed and the system is still activated, the most recent set speed will automatically resume when you push the button (RES+).
It will not resume, however, if the vehicle speed has dropped below approximately 30 km/h (20 mph).
To turn Cruise Control system off, do one of the following:
/CRUISE
button (the cruise indicator light will be turn off).Both of these actions cancel cruise control operation. If you want to resume cruise control operation, repeat the steps provided in “To set cruise control speed” on page 6-80.
Depress the brake pedal. Depress the clutch pedal if equipped with a manual transaxle. Press the O/CANCEL switch located on the steering wheel.
1. Cruise indicator 2. Set speed 3. Vehicle-to-vehicle distance To see SCC screen on the LCD display on the cluster, select Assist mode (). For more informations, refer to “LCD display” on page 4-51.
1. Using a flat-blade screwdriver, gently pry the lens cover from lamp housing. 2. Remove the bulb by pulling it straight out. 3. Install a new bulb in the socket. 4. Align the lens cover tabs with the lamp housing notches and snap the lens into place.
Interior general precautions Prevent chemicals such as perfume, cosmetic oil, sun cream, hand cleaner, and air freshener from contacting the interior parts because they may cause damage or discoloration. If they do contact the interior parts, wipe them off immediately.