
Use the cargo area cover to hide items stored in the cargo area.
Removal and installation

To remove the cargo area cover:
1. Fold the cargo area cover up in half.

2. Firmly hold the folded part of the cover and lift it up.

3. While lifting the cover up, hold the area near the front slots. Then, pull up the cover at approximately 45° angle.
WARNING
Folded cover may block the rear view. Put the folded cover in the appropriate position.

To install the cargo area cover:
To use the cargo area cover, insert the 4 edges into the slots.
WARNING
Do not place objects on the cargo area cover. Such objects may be thrown about inside the vehicle and possibly injure vehicle occupants during an accident or when braking.
CAUTION
Since the cargo area cover may be damaged or malformed, do not put luggage on it when it is used.
When using a floor mat on the front floor carpet, make sure it attaches to the floor mat anchor(s) in your vehicle. This keeps the floor mat from sliding forward.
Roof rack (wagon) If the vehicle has a roof rack, you can load cargo on top of your vehicle. Crossbars and fixing components needed to install the roof rack on your vehicle may be obtained from an authorized Kia dealer/service partner or other qualified shop.
More severe weather conditions of winter result in greater wear and other problems. To minimize winter driving problem, you should follow these suggestions: ❈ Snow tires and tire chains for the national language (Icelandic, Bulgarian) see Chapter 10, Appendix.
1. Remove the lamp assembly from the vehicle by prying the lens and pulling the assembly out. 2. Disconnect the bulb electrical connector. 3. Separate the socket and the lens parts by turning the socket counterclockwise until the tabs on the socket align with the slots on the lens part.