Kia Soul: Warning lights / Electronic Power Steering (EPS) warning light, Malfunction Indicator Lamp (MIL)
Electronic Power Steering (EPS) warning light

This warning light illuminates:
- Once you set the ignition switch or Engine Start/Stop Button to the ON
position.
- This indicator light comes on after the ignition key is turned to the ON position
and then goes out after approximately 3 seconds.
- When there is a malfunction with the EPS.
In this case, have the vehicle inspected by a professional workshop. Kia recommends
to visit an authorized Kia dealer/service partner.
Malfunction Indicator Lamp (MIL)

This warning light illuminates:
- Once you set the ignition switch or Engine Start/Stop Button to the ON
position.
- It remains on until the engine is started.
- When there is a malfunction with the emission control system. In this
case, have the vehicle inspected by a professional workshop. Kia recommends
to visit an authorized Kia dealer/service partner.
CAUTION
Malfunction Indicator Lamp (MIL)
Driving with the Malfunction Indicator Lamp (MIL) on may cause damage to the
emission control systems which could effe
CAUTION
Gasoline Engine
If the Malfunction Indicator Lamp (MIL) illuminates, potential catalytic converter
damage is possible which could result in loss of engine power. In this case, have
the vehicle inspected by a professional workshop as soon as possible.
Kia recommends to visit an authorized Kia dealer/service partner.
Anti-lock brake system (ABS) warning light This warning light illuminates: Once you set the ignition switch or Engine Start/Stop button to the ON position. - It illuminates for approximately 3 seconds ...
This warning light illuminates: Once you set the ignition switch or Engine Start/Stop button to the ON position. - It remains on until the engine is started. When there is a malfunction with either the ...
Other information:
To set smart cruise control speed: 1. Press the CRUISE button, to turn the system on. The CRUISE indicator in the instrument cluster will illuminate. 2. Accelerate to the desired speed. Smart Cruise Control speed can be set as follows: • 10 km/h (5mph) ~ 160 km/h 3. Push the button (SET-), and release ...
Seat belt systems should never be disassembled or modified. In addition, care should be taken to assure that seat belts and belt hardware are not damaged by seat hinges, doors or other abuse. WARNING When you return the rear seatback to its upright position after the rear seatback was folded down, be ...