Kia Soul (SK3): Features of your vehicle / Forward/Reverse Parking Distance Warning (PDW-F/R) system

Kia Soul (SK3) 2020-2025 Owners Manual / Features of your vehicle / Forward/Reverse Parking Distance Warning (PDW-F/R) system

Kia Soul. Forward/Reverse Parking Distance Warning (PDW-F/R) system

Parking Distance Warning system the driver during movement of the vehicle by chiming if any object is sensed within the distance of 100 cm (39 in.) in front and 120 cm (47 in.) behind the vehicle.

This system is a supplemental system and it is not intended to nor does it replace the need for extreme care and attention of the driver.

The sensing range and objects detectable by the sensors are limited. Whenever moving pay as much attention to what is in front and behind of you as you would in a vehicle without Parking Distance Warning system.

WARNING

Parking Distance Warning system should only be considered as a supplementary function. The driver must check the front and rear view. The operational function of Parking Distance Warning system can be affected by many factors and conditions of the surroundings, so the responsibility rests always with the driver.

Warning system precautions Reverse Parking Distance Warning system may not sound consistently depending on the speed and shapes of the objects detected.

Operating condition This system activates when the Parking Distance Warning system button is pressed with the ignition switch ON. The indicator of the Parking Distance Warning system button turns on automatically and activates the Parking Distance Warning system when you shift the gear to the R (Reverse) position.

Other information:

Kia Soul (SK3) 2020-2025 Owners Manual: Tire replacement

If the tire is worn evenly, a tread wear indicator (A) will appear as a solid band across the tread. This shows there is less than 1.6 mm (1/16 in.) of tread left on the tire. Replace the tire when this happens. Do not wait for the band to appear across the entire tread before replacing the tire.

Kia Soul (SK3) 2020-2025 Owners Manual: Tail lamp / Back up lamp bulb replacement (Rear combination lamp Type A)

1. Open the tailgate. 2. Remove the service cover. (Loosen the lamp assembly retaining screws and remove the lamp assembly from the body of the vehicle for back-up lamp) 3. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly.

Categories

 
Copyright © 2026 www.ksoulsk3.com - 0.013