Kia Soul (SK3): What to do in an emergency / Road warning
Hazard warning flasher
The hazard warning flasher serves as a warning to other drivers to exercise extreme caution when approaching, overtaking, or passing your vehicle.
It should be used whenever emergency repairs are being made or when the vehicle is stopped near the edge of a roadway.
Depress the flasher switch with the ignition switch in any position. The flasher switch is located in the center console switch panel. All turn signal lights will flash simultaneously.
- The hazard warning flasher operates whether your vehicle is running or not.
- The turn signals do not work when the hazard flasher is on.
- Care must be taken when using the hazard warning flasher while the vehicle is being towed.
If the engine stalls at a crossroad or crossing If the engine stalls at a crossroad or crossing, set the shift lever in the N (Neutral) position and then push the vehicle to a safe place.
Other information:
Kia Soul (SK3) 2020-2025 Owners Manual: Tail lamp / Back up lamp bulb replacement (Rear combination lamp Type A)
1. Open the tailgate. 2. Remove the service cover. (Loosen the lamp assembly retaining screws and remove the lamp assembly from the body of the vehicle for back-up lamp) 3. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly.
Kia Soul (SK3) 2020-2025 Owners Manual: Stop and tail lamp (LED type) bulb replacement (Rear combination lamp Type B)
If the stop and tail lamp (LED) (1,2), does not operate, have your vehicle checked by a professional workshop. Kia recommends to visit an authorized Kia dealer/service partner. The LED lamps cannot be replaced as a single unit because it is an integrated unit.
Categories
- Manuals Home
- Kia Soul Owners Manual
- Safety features of your vehicle
- System setting and activation
- Defogging logic
- New on site
- Most important about car
