Kia Soul: Front seat adjustment - power / Seat cushion height. Lumbar support

Kia Soul (SK3) 2020-2023 Owners Manual / Safety features of your vehicle / Seat / Front seat adjustment - power / Seat cushion height. Lumbar support

Seat cushion height

Kia Soul. Seat cushion height. Lumbar support

1. Pull the front portion of the control switch up to raise or press down to lower the front part of the seat cushion. Pull the rear portion of the control switch up to raise or press down to lower the seat cushion.

2. Release the switch once the seat reaches the desired position.

Lumbar support

Kia Soul. Seat cushion height. Lumbar support

The lumbar support can be adjusted by pressing the lumbar support switch on the side of the seat.

1. Press the front portion of the switch to increase support, or the rear portion of the switch, to decrease support.

2. Release the switch once it reaches the desired position.

Forward and rearward, Seatback angle

Forward and rearward 1. Push the control switch forward or rearward to move the seat to the desired position. 2. Release the switch once the seat reaches the desired position. Seatback angle 1. Push the ...

Headrest (for front seat)

The driver's and front passenger's seats are equipped with a headrest for the occupant's safety and comfort. The headrest not only provides comfort for the driver and front passenger, but ...

Other information:

Kia Soul (SK3) 2020-2023 Owners Manual: Checking tire inflation pressure

Check your tires once a month or more. Also, check the tire pressure of the spare tire. How to check Use a good quality gauge to check tire pressure. You can not tell if your tires are properly inflated simply by looking at them. Radial tires may look properly inflated even when they're underinflated. ...

Kia Soul (SK3) 2020-2023 Owners Manual: Side repeater lamp (Bulb type) bulb replacement

1. Remove the lamp assembly from the vehicle by prying the lens and pulling the assembly out. 2. Disconnect the bulb electrical connector. 3. Separate the socket and the lens parts by turning the socket counterclockwise until the tabs on the socket align with the slots on the lens part. 4. Remove the ...