Kia Soul (SK3): Special driving conditions / Smooth cornering, Driving at night

Smooth cornering

Kia Soul. Smooth cornering, Driving at night

Avoid braking or gear changing in corners, especially when roads are wet. Ideally, corners should always be taken under gentle acceleration. If you follow these suggestions, tire wear will be held to a minimum.

Driving at night

Kia Soul. Smooth cornering, Driving at night

Because night driving presents more hazards than driving in the daylight, here are some important tips to remember:

  • Slow down and keep more distance between you and other vehicles, as it may be more difficult to see at night, especially in areas where there may not be any street lights.
  • Adjust your mirrors to reduce the glare from other driver's headlights.
  • Keep your headlights clean and properly aimed on vehicles not equipped with the automatic headlight aiming feature. Dirty or improperly aimed headlights will make it much more difficult to see at night.
  • Avoid staring directly at the headlights of oncoming vehicles. You could be temporarily blinded, and it will take several seconds for your eyes to readjust to the darkness.

    If it is necessary to rock the vehicle to free it from snow, sand, or mud, first turn the steering wheel right and left to clear the area around your front wheels.

    Driving in the rain Rain and wet roads can make driving dangerous, especially if you’re not prepared for the slick pavement. Here are a few things to consider when driving in the rain: A heavy rainfall will make it harder to see and will increase the distance needed to stop your vehicle, so slow down.

    Other information:

    Kia Soul (SK3) 2020-2025 Owners Manual: Using the TMK

    1. Detach the speed restriction label (1) from the sealant bottle (2), and place it in a highly visible place inside the vehicle such as on the steering wheel to remind the driver not to drive too fast. 2. Screw connection hose (10) onto the connector of the sealant bottle.

    Kia Soul (SK3) 2020-2025 Owners Manual: Tailgate room lamp replacement

    1. Using a flat-blade screwdriver, gently pry the lens cover from lamp housing. 2. Remove the bulb by pulling it straight out. 3. Install a new bulb in the socket. 4. Align the lens cover tabs with the lamp housing notches and snap the lens into place.

    Categories

     
    Copyright © 2026 www.ksoulsk3.com - 0.0073