Kia Soul (SK3): Warning lights / Exhaust system (GPF) warning light

Kia Soul. Exhaust system (GPF) warning light

This warning light illuminates:

  • When there is a malfunction with Gasoline Particulate Filter (GPF) system.
  • When this warning light illuminates, it may turn off after driving the vehicle:
    - The vehicle should be driven for more than 30 minutes at a speed of 80k m/h (50 mph) and faster.
    - Ensure the following conditions are all met: safe road conditions, transmission 3rd gear or above, and engine speed of 1,500 - 4,000 rpm.

If this warning light blinks in spite of the procedure (at this time the LCD warning message will be displayed), have the GPF system checked by a professional workshop. Kia recommends to visit an authorized Kia dealer/service partner.

CAUTION

Gasoline Engine with GPF (if equipped)

If you continue to drive with the GPF warning light blinking for a long time, the GPF system can be damaged and fuel consumption can worsen.

    Forward Collision- Avoidance Assist (FCA) warning light This indicator light illuminates: • When there is a malfunction with Forward Collision-Avoidance Assist (FCA) system.

    Overspeed warning light This warning light blinks: When you drive the vehicle more than 120 km/h. - This is to prevent you from driving your vehicle with overspeed.

    Other information:

    Kia Soul (SK3) 2020-2025 Owners Manual: If you have a flat tire (with spare tire)

    Jack and tools The jack, jack handle, wheel lug nut wrench are stored in the luggage compartment. Pull up the luggage box cover to reach this equipment. 1. Jack handle 2. Jack 3. Wheel lug nut wrench Jacking instructions The jack is provided for emergency tire changing only.

    Kia Soul (SK3) 2020-2025 Owners Manual: Stop/tail and turn signal lamp (Bulb type) bulb replacement (Rear combination lamp Type A)

    1. Open the tailgate. 2. Loosen the lamp assembly retaining screws with a screwdriver. 3. Remove the rear combination lamp assembly from the body of the vehicle. 4. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly.

    Categories

     
    Copyright © 2026 www.ksoulsk3.com - 0.0084