
Parking Distance Warning system the driver during movement of the vehicle by chiming if any object is sensed within the distance of 100 cm (39 in.) in front and 120 cm (47 in.) behind the vehicle.
This system is a supplemental system and it is not intended to nor does it replace the need for extreme care and attention of the driver.
The sensing range and objects detectable by the sensors are limited. Whenever moving pay as much attention to what is in front and behind of you as you would in a vehicle without Parking Distance Warning system.
WARNING
Parking Distance Warning system should only be considered as a supplementary function. The driver must check the front and rear view. The operational function of Parking Distance Warning system can be affected by many factors and conditions of the surroundings, so the responsibility rests always with the driver.
Warning system precautions Reverse Parking Distance Warning system may not sound consistently depending on the speed and shapes of the objects detected.
Operating condition This system activates when the Parking Distance Warning system button is pressed with the ignition switch ON. The indicator of the Parking Distance Warning system button turns on automatically and activates the Parking Distance Warning system when you shift the gear to the R (Reverse) position.
Wheel replacement When replacing the metal wheels for any reason, make sure the new wheels are equivalent to the original factory units in diameter, rim width and offset. WARNING A wheel that is not the correct size may adversely affect wheel and bearing life, braking and stopping abilities, handling characteristics, ground clearance, body
Please prepare bulbs with appropriate standards in case of emergencies (Refer to “Bulb wattage” on page 9-07 for further information). When changing bulbs and sorts, first turn off the engine at a safe place, firmly apply the side brake and take out the battery's negative (-) terminal.