Kia Soul: Seat / Front seat adjustment - manual
Forward and backward

To move the seat forward or backward:
1. Pull the seat slide adjustment lever up and hold it.
2. Slide the seat to the position you desire.
3. Release the lever and make sure the seat is locked in place.
Adjust the seat before driving, and make sure the seat is locked securely by
trying to move forward and backward without using the lever. If the seat moves,
it is not locked properly.
Seatback angle

To recline the seatback:
1. Lean forward slightly and lift up the seatback recline lever.
2. Carefully lean back on the seat and adjust the seatback of the seat to the
position you desire.
3. Release the lever and make sure the seatback is locked in place. (The lever
MUST return to its original position for the seatback to lock.)
Seat cushion height

To change the height of the seat cushion, push the lever upwards or downwards.
- To lower the seat cushion, push down the lever several times.
- To raise the seat cushion, pull up the lever several times.
Leather is made from the outer skin of an animal, which goes through a special process to be available for use. Since it is a natural substance, each part differs in thickness or density. Wrinkles may ...
The driver’s seat can be adjusted by using the control switches located on the outside of the seat cushion. Before driving, adjust the seat to the proper position so as to easily control the steering ...
Other information:
High Beam Assist is a system that automatically adjusts the headlamp range (switches between high beam and low beam) according to the brightness of other vehicles and road conditions. Operation condition 1. Place the light switch in the AUTO position. 2. Turn on the high beam by pushing the lever away ...
❈ The actual battery label in the vehicle may differ from the illustration. 1. CMF60L-BCI: The Kia model name of battery 2. 12V: The nominal voltage 3. 60Ah(20HR): The nominal capacity (in Ampere hours) 4. 92RC: The nominal reserve capacity (in min.) 5. 550CCA: The cold-test current in amperes by ...