Kia Soul: Instrument cluster / Instrument cluster control
Adjusting instrument cluster illumination

WARNING
Never adjust the instrument cluster while driving. This could result in loss
of control and lead to an accident that may cause death, serious injury, or property
damage.
The brightness of the instrument panel illumination is changed by pressing the
illumination control button (“+” or “-”) when the ignition switch or Engine Start/Stop
button is ON, or the tail lights are turned on.

- If you hold the illumination control button (“+” or “-”), the brightness
will be changed continuously.
- If the brightness reaches to the maximum or minimum level, an alarm will
sound.
1. Tachometer 2. Speedometer 3. Engine coolant temperature gauge 4. Fuel gauge 5. Warning and indicator lights 6. LCD display ...
The LCD Display modes can be changed by using the control buttons on the steering wheel. 1. : MODE button for change the LCD MODES 2.: MOVE scroll switch for select the items 3. OK : SET/REST button for ...
Other information:
The ignition switch must be on for the turn signals to function. To turn on the turn signals, move the lever up or down (A). The green arrow indicators on the instrument panel indicate which turn signal is operating. They will selfcancel after a turn is completed. If the indicator continues to flash ...
Overspeed warning light This warning light blinks: When you drive the vehicle more than 120 km/h. - This is to prevent you from driving your vehicle with overspeed. - The overspeed warning chime also sound for approximately 5 seconds. LED headlamp warning light This warning light illuminates: Once you ...