Kia Soul (SK3): What to do in an emergency / If the engine will not start

If the engine doesn't turn over or turns over slowly

1. Check the battery connections to be sure they are clean and tight.

2. Turn on the interior light. If the light dims or goes out when you operate the starter, the battery is discharged.

3. Check the starter connections to be sure they are securely tightened.

4. Do not push or pull the vehicle to start it. See instructions for “Jump starting” on page 7-05.

WARNING

If the engine will not start, do not push or pull the vehicle to start it. This could result in a collision or cause other damage. In addition, push or pull starting may cause the catalytic converter to be overloaded and create a fire hazard.

If engine turns over normally but does not start

1. Check the fuel level.

2. With the ignition switch in the LOCK position, check all connectors at the ignition coils and spark plugs. Reconnect any that may be disconnected or loose.

3. Check the fuel line in the engine compartment.

4. If the engine still does not start, call a professional workshop. Kia recommends to call an authorized Kia dealer/service partner.

    If the engine stalls at a crossroad or crossing If the engine stalls at a crossroad or crossing, set the shift lever in the N (Neutral) position and then push the vehicle to a safe place.

    Connect cables in numerical order and disconnect in reverse order. Jump starting Jump starting can be dangerous if done incorrectly. Therefore, to avoid harm to yourself or damage to your vehicle or battery, follow the jump starting procedures.

    Other information:

    Kia Soul (SK3) 2020-2025 Owners Manual: Maintenance services

    You should exercise the utmost care to prevent damage to your vehicle and injury to yourself whenever performing any maintenance or inspection procedures. Inadequate, incomplete or insufficient servicing may result in operational problems with your vehicle that could lead to vehicle damage, an accident, or personal injury.

    Kia Soul (SK3) 2020-2025 Owners Manual: Map lamp (Bulb type) bulb replacement

    WARNING Prior to working on the Interior lamps, ensure that the “OFF” button is depressed to avoid burning your fingers or receiving an electric shock. 1. Using a flat-blade screwdriver, gently pry the lens cover from lamp housing. 2. Remove the bulb by pulling it straight out.

    Categories

     
    Copyright © 2026 www.ksoulsk3.com - 0.0132