Kia Soul: Light bulbs / License plate lamp bulb replacement

Kia Soul (SK3) 2020-2021 Owners Manual / Maintenance / Light bulbs / License plate lamp bulb replacement

Kia Soul. License plate lamp bulb replacement

1. Remove the lamp assembly by using a flat-blade screwdriver.

2. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly.

3. Remove the bulb from bulb-socket by pulling it out.

4. Insert a new bulb by inserting it into the bulb-socket.

5. Install the socket in the assembly by aligning the tabs on the socket with the slots in the assembly. Push the socket into the assembly and turn the socket clockwise.

6. Install the lamp assembly to the body of the vehicle.

High mounted stop lamp (bulb type) bulb replacement

1. Open the tailgate. 2. Remove the cover. 3. Loosen the retaining bolts and remove the hose (1). 4. Pull out the module from the high mounted stop lamp assembly by pulling both clips. 5. Replace the ...

Map lamp (Bulb type) bulb replacement

WARNING Prior to working on the Interior lamps, ensure that the “OFF” button is depressed to avoid burning your fingers or receiving an electric shock. 1. Using a flat-blade screwdriver, gently pry ...

Other information:

Kia Soul (SK3) 2020-2021 Owners Manual: Maintenance Under Severe Usage Conditions - For Gasoline Engine

Maintenance operation I: Inspect and if necessary, adjust, correct, clean or replace. R: Replace or change. SEVERE DRIVING CONDITIONS A: Repeatedly driving short distance of less than 8 km (5 miles) in normal temperature or less than 16 km (10 miles) in freezing temperature. B: Extensive engine idling ...

Kia Soul (SK3) 2020-2021 Owners Manual: Non-operational conditions of Parking Distance Warning system

Parking Distance Warning system may not operate normally when: 1. Moisture is frozen to the sensor (It will operate normally when moisture melts). 2. Sensor is covered with foreign matter, such as snow or water, or the sensor cover is blocked. (It will operate normally when the material is removed or ...