Kia Soul: If you have a flat tire (with Tire Mobility Kit) / Notes on the safe use of the Tire Mobility Kit
- Park your car at the side of the road so that you can work with the TMK
away from moving traffic. Place your warning triangle in a prominent place to
make passing vehicles aware of your location.
- To be sure your vehicle will not move, even when you're on fairly level
ground, always set your parking brake.
- Only use the TMK for sealing/inflation passenger car tires. Do not use
on motorcycles, bicycles or any other type of tires.
- Do not remove any foreign objects – such as nails or screws – that have
penetrated the tire.
- Before using the TMK, read the precautionary advice printed on the sealant
bottle!
- Provided the car is outdoors, leave the engine running. Otherwise operating
the compressor may eventually drain the car battery.
- Never leave the TMK unattended while it is being used.
- Do not leave the compressor running for more than 10 min. at a time or
it may overheat.
- Do not use the TMK if the ambient temperature is below -30 °C (-22 °F).
- When the tire and wheel are damaged, do not use Tire Mobility Kit for
your safety.
Technical data
System voltage: DC 12 V
Working voltage: DC 10 - 15 V
Amperage rating: max. 15 A
Suitable for use at temperatures: -40 ~ +70°C (-40 ~ +158°F)
Max. working pressure: 6.2 bar (90 psi)
Size Compressor: 140 x 150 x 60 mm (5.5 x 5.9 x 2.4)
Sealant bottle: 104 x ø 85.5 mm (5.5 x 5.9 x 2.4)
Compressor weight: 795 g (1.75 lbs)
Sealant volume: 300 ml (18.3 cu. in.)
❈ Sealant and spare parts can be obtained and replaced at an authorized vehicle
or tire dealer. Empty sealant bottles may be disposed of at home. Liquid residue
from the sealant should be disposed of by your vehicle or tire dealer or in accordance
with local waste disposal regulations.
1. After driving approximately 7~10 km ( 4~6 miles or about 10 minutes), stop at a suitable location. 2. Connect connection hose (10) of the compressor directly to the tire valve. 3. Connect between compressor ...
Towing service If emergency towing is necessary, we recommend having it done by an authorized Kia dealer or a commercial tow-truck service. Proper lifting and towing procedures are necessary to prevent ...
Other information:
High Beam Assist is a system that automatically adjusts the headlamp range (switches between high beam and low beam) according to the brightness of other vehicles and road conditions. Operation condition 1. Place the light switch in the AUTO position. 2. Turn on the high beam by pushing the lever away ...
Seat belt systems should never be disassembled or modified. In addition, care should be taken to assure that seat belts and belt hardware are not damaged by seat hinges, doors or other abuse. WARNING When you return the rear seatback to its upright position after the rear seatback was folded down, be ...