Kia Soul: Headrest (for front seat) / Removal and installation

Kia Soul (SK3) 2020-2021 Owners Manual / Safety features of your vehicle / Seat / Headrest (for front seat) / Removal and installation

Kia Soul. Removal and installation

To remove the headrest:

1. Recline the seatback (2) with the recline lever or switch (1).

2. Raise headrest as far as it can go.

3. Press the headrest release button (3) while pulling the headrest up (4).

WARNING

NEVER allow anyone to ride in a seat with the headrest removed.

Kia Soul. Removal and installation

To reinstall the headrest:

1. Put the headrest poles (2) into the holes while pressing the release button (1).

2. Recline the seatback (4) with the recline lever or switch (3).

3. Adjust the headrest to the appropriate height.

WARNING

Always make sure the headrest locks into position after reinstalling and adjusting it properly.

Forward and rearward adjustment. Adjusting the height up and down
Forward and rearward adjustment The headrest may be adjusted forward to 4 different positions by pulling the headrest forward to the desired detent. To adjust the headrest to it’s furthest rearwards ...

Seatback pocket
The seatback pocket is provided on the back of the front passenger’s seatback. WARNING Seatback pockets Do not put heavy or sharp objects in the seatback pockets. In an accident they could come loose ...

Other information:

Kia Soul (SK3) 2020-2021 Owners Manual: Power windows


The ignition switch must be in the ON position for power windows to operate. Each door has a power window switch that controls the door's window. The driver has a power window lock button which can block the operation of rear passenger windows. The power windows can be operated for approximately ...

Kia Soul (SK3) 2020-2021 Owners Manual: License plate lamp bulb replacement


1. Remove the lamp assembly by using a flat-blade screwdriver. 2. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly. 3. Remove the bulb from bulb-socket by pulling it out. 4. Insert a new bulb by inserting it ...

Copyright © www.ksoulsk3.com 2020-2021