Kia Soul: Air bag warning and indicator / Passenger’s front air bag OFF indicator
❈ The actual indicator in the vehicle may differ from the illustration.
The passenger’s front air bag OFF indicator illuminates for about 4 seconds after the ignition switch is turned to the ON position.
The passenger’s front air bag OFF indicator also comes on when the passenger’s front air bag ON/OFF switch is set to the OFF position and goes off when the passenger’s front air bag ON/OFF switch is set to the ON position.
CAUTION
If the passenger’s front air bag ON/OFF switch malfunctions, the passenger’s front air bag OFF indicator will not illuminate (The passenger's front air bag ON indicator comes on and goes off after approximately 60 seconds) and the passenger’s front air bag will inflate in a frontal impact even if the passenger’s front air bag ON/OFF switch is set to the OFF position.
In this case, have the passenger's front air bag ON/OFF switch and the SRS air bag system inspected by a professional workshop.
Kia recommends to visit an authorized Kia dealer/service partner.
Passenger’s front air bag ON indicator
❈ The actual indicator in the vehicle may differ from the illustration. The passenger's front air bag ON indicator illuminates for approximately 4 seconds after the ignition switch is turned to ...
SRS components and functions
The SRS consists of the following components: 1. Driver's front air bag module 2. Passenger's front air bag module* 3. Side air bag modules* 4. Curtain air bag modules* 5. Retractor pre-tensioner ...
Other information:
Kia Soul (SK3) 2020-2025 Owners Manual: Emergency commodity
There are some emergency commodities in the vehicle to help you respond to the emergency situation. Fire extinguisher If there is small fire and you know how to use the fire extinguisher, take the following steps carefully. 1. Pull the pin at the top of the extinguisher that keeps the handle from being ...
Kia Soul (SK3) 2020-2025 Owners Manual: Stop/tail and turn signal lamp (Bulb type) bulb replacement (Rear combination lamp Type A)
1. Open the tailgate. 2. Loosen the lamp assembly retaining screws with a screwdriver. 3. Remove the rear combination lamp assembly from the body of the vehicle. 4. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly. ...
