Kia Soul: Cruise control system / To resume cruising speed at more than approximately 30 km/h (20 mph)

Kia Soul (SK3) 2020-2024 Owners Manual / Driving your vehicle / Cruise control system / To resume cruising speed at more than approximately 30 km/h (20 mph)

Kia Soul. To resume cruising speed at more than approximately 30 km/h (20 mph)

If any method other than the cruise / CRUISE button was used to cancel cruising speed and the system is still activated, the most recent set speed will automatically resume when you push the button (RES+).

It will not resume, however, if the vehicle speed has dropped below approximately 30 km/h (20 mph).

To turn Cruise Control system off, do one of the following:

Press the cruise /CRUISE button (the cruise indicator light will be turn off).
Turn the ignition off.

Both of these actions cancel cruise control operation. If you want to resume cruise control operation, repeat the steps provided in “To set cruise control speed” on page 6-80.

To cancel Cruise Control system, do one of the following

Depress the brake pedal. Depress the clutch pedal if equipped with a manual transaxle. Press the O/CANCEL switch located on the steering wheel. Decrease the vehicle speed lower than the memory speed by ...

Smart Cruise Control (SCC) system

1. Cruise indicator 2. Set speed 3. Vehicle-to-vehicle distance To see SCC screen on the LCD display on the cluster, select Assist mode (). For more informations, refer to “LCD display” on page 4-51. ...

Other information:

Kia Soul (SK3) 2020-2024 Owners Manual: Exterior care

Exterior general caution It is very important to follow the label directions when using any chemical cleaner or polish. Read all warning and caution statements that appear on the label. Finish maintenance Washing To help protect your vehicle’s finish from rust and deterioration, wash it thoroughly ...

Kia Soul (SK3) 2020-2024 Owners Manual: License plate lamp bulb replacement

1. Remove the lamp assembly by using a flat-blade screwdriver. 2. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly. 3. Remove the bulb from bulb-socket by pulling it out. 4. Insert a new bulb by inserting it ...