Theft-alarm stage The alarm will be activated if any of the following occurs while the system is armed. A door is opened without using the transmitter (or smart key).
To remove the cover : 1. Pull out the door handle. 2. Press the lever (1) located inside the bottom part of the cover with a key or flat-head screwdriver.
Blade inspection NOTICE Commercial hot waxes applied by automatic car washes have been known to make the windshield difficult to clean. Contamination of either the windshield or the wiper blades with foreign matter can reduce the effectiveness of the windshield wipers.
1. Using a flat-blade screwdriver, gently pry the lamp assembly from interior. 2. Remove the bulb by pulling it straight out. 3. Install a new bulb in the socket. 4. Install the lamp assembly to interior. CAUTION Be careful not to dirty or damage the lens, lens tab, and plastic housings.