Kia Soul: Warning lights / Engine oil pressure warning light

This warning light illuminates:
- Once you set the ignition switch or Engine Start/Stop Button to the ON
position.
- It remains on until the engine is started.
- When the engine oil pressure is low.
If the engine oil pressure is low:
1. Drive carefully to the nearest safe location and stop your vehicle.
2. Turn the engine off and check the engine oil level (For more details, refer
to “Engine oil” on page 8-31). If the level is low, add oil as required.
If the warning light remains on after adding oil or if oil is not available,
have the vehicle inspected by a professional workshop as soon as possible. Kia recommends
to visit an authorized Kia dealer/service partner.
CAUTION
Engine Oil Pressure Warning Light
- If the engine does not stop immediately after the Engine Oil Pressure
Warning Light is illuminated, severe damage could result.
- If the warning light stays on while the engine is running, it indicates
that there may be serious engine damage or malfunction. In this case,
1. Stop the vehicle as soon as it is safe to do so.
2. Turn off the engine and check the oil level. If the oil level is low, fill
the engine oil to the proper level.
3. Start the engine again. If the warning light stays on after the engine is
started, turn the engine off immediately. In this case, have the vehicle inspected
by a professional workshop. Kia recommends to visit an authorized Kia dealer/service
partner.
This warning light illuminates: Once you set the ignition switch or Engine Start/Stop button to the ON position. - It remains on until the engine is started. When there is a malfunction with either the ...
The engine oil level warning light illuminates when the engine oil level should be checked. If the warning light comes on, check the engine oil level as soon as possible and add engine oil as required. ...
Other information:
❈ The actual indicator in the vehicle may differ from the illustration. The passenger's front air bag ON indicator illuminates for approximately 4 seconds after the ignition switch is turned to the ON position. The passenger's front air bag ON indicator also comes on when the passenger's ...
1. Remove the lamp assembly by using a flat-blade screwdriver. 2. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly. 3. Remove the bulb from bulb-socket by pulling it out. 4. Insert a new bulb by inserting it ...