Kia Soul: Lighting / Headlight escort function

Kia Soul (SK3) 2020-2025 Owners Manual / Features of your vehicle / Lighting / Headlight escort function

The headlights (and/or taillights) will remain on for approximately 5 minutes after the ignition key is removed when the engine is turned off. However, if the driver’s door is opened and closed, the headlights are turned off after 15 seconds.

The headlights can be turned off by pressing the lock button on the transmitter (or smart key) twice or turning off the light switch from the headlight or Auto light position.

CAUTION

If the driver gets out of the vehicle through other doors (except driver's door), the battery saver function does not operate and the headlight escort function does not turn off automatically. Therefore, It causes the battery to be discharged. In this case, make sure to turn off the lamp before getting out of the vehicle.

Lighting
Battery saver function The purpose of this feature is to prevent the battery from being discharged. The system automatically turns off the parking lights when the driver removes the ignition key (smart ...

Headlight welcome function
When the headlight switch is in the ON or AUTO position and all doors (and tailgate) are closed and locked, if you press the door unlock button on the transmitter (or smart key), the headlights will come ...

Other information:

Kia Soul (SK3) 2020-2025 Owners Manual: Operating door locks from outside the vehicle


To remove the cover : 1. Pull out the door handle. 2. Press the lever (1) located inside the bottom part of the cover with a key or flat-head screwdriver. 3. Push out the cover (2) while pressing the lever. Turn the key toward the rear of the vehicle to lock and toward the front of the vehicle to unlock. ...

Kia Soul (SK3) 2020-2025 Owners Manual: Using the TMK


1. Detach the speed restriction label (1) from the sealant bottle (2), and place it in a highly visible place inside the vehicle such as on the steering wheel to remind the driver not to drive too fast. 2. Screw connection hose (10) onto the connector of the sealant bottle. 3. Ensure that button (9) ...

Copyright © www.ksoulsk3.com 2020-2025