Kia Soul (SK3): Seat belt restraint system / 3 Point rear center belt
WARNING
Rear center seat belt
Do not separate mini tongue (1) and mini buckle (2) even if there is not an occupant.
If it is separated, It may hit the rear seat occupants in a collision or sudden stops.
Pull the tongue plate and insert the tongue plate into the open end of the buckle until an audible “click” is heard, indicating the latch is locked. Make sure the belt is not twisted.
CAUTION
When using the rear center seat belt, the buckle with the “CENTER” mark must be used.
There will be an audible “click” when the tab locks in the buckle. The seat belt automatically adjusts to the proper length only after the lap belt is adjusted manually so that it fits snugly around your hips, if you lean forward in a slow, easy motion, the belt will extend and let you move around. If there is a sudden stop or impact, the belt will lock into position. It will also lock if you try to lean forward too quickly.
WARNING
When using the rear seat center belt, you must lock all tongue plates and buckles. If any tongue plate or buckle is not locked, it will increase the chance of injury in the event of collision.
Height adjustment You can adjust the height of the shoulder belt anchor to one of 3 positions for maximum comfort and safety. The height of the adjusting seat belt should not be too close to your neck.
Your vehicle is equipped with pretensioner seatbelts at the front and rear outboard seating positions. The purpose of the pre-tensioner is to make sure that the seat belts fit tightly against the occupant's body in certain collisions.
Other information:
Kia Soul (SK3) 2020-2025 Owners Manual: Checking tire inflation pressure
Check your tires once a month or more. Also, check the tire pressure of the spare tire. How to check Use a good quality gauge to check tire pressure. You can not tell if your tires are properly inflated simply by looking at them. Radial tires may look properly inflated even when they're underinflated.
Kia Soul (SK3) 2020-2025 Owners Manual: Glove box lamp replacement
1. Using a flat-blade screwdriver, gently pry the lamp assembly from interior. 2. Remove the bulb by pulling it straight out. 3. Install a new bulb in the socket. 4. Install the lamp assembly to interior. CAUTION Be careful not to dirty or damage the lens, lens tab, and plastic housings.
Categories
- Manuals Home
- Kia Soul Owners Manual
- Defroster
- Towing
- Power outlet
- New on site
- Most important about car
