Kia Soul (SK3): Automatic climate control system / Automatic heating and air conditioning

Kia Soul. Automatic heating and air conditioning

1. Push the AUTO button. The modes, fan speeds, air intake and air-conditioning will be controlled automatically according to the temperature setting.

Kia Soul. Automatic heating and air conditioning

2. Set the temperature control knob to set the desired temperature.

NOTICE

  • To turn the automatic operation off, select any button or switch of the following:
    - Mode selection button
    - Air conditioning button
    - Front windshield defroster button (Press the button one more time to deselect the front windshield defroster function. The AUTO sign will illuminate on the information display once again.)
    - Fan speed control knob
    The selected function will be controlled manually while other functions operate automatically.
  • For your convenience and to improve the effectiveness of the climate control, use the AUTO button and set the temperature to 22°C (72°F).

Kia Soul. Automatic heating and air conditioning

NOTICE

Never place anything over the sensor located on the instrument panel to ensure better control of the heating and cooling system.

    1. Driver`s temperature control knob 2. AUTO (automatic control) button 3. Front windshield defroster button 4. Rear window defroster button 5. Air conditioning button 6.

    The heating and cooling system can be controlled manually by pushing buttons other than the AUTO button. In this case, the system works sequentially according to the order of buttons selected.

    Other information:

    Kia Soul (SK3) 2020-2025 Owners Manual: Emergency commodity

    There are some emergency commodities in the vehicle to help you respond to the emergency situation. Fire extinguisher If there is small fire and you know how to use the fire extinguisher, take the following steps carefully. 1. Pull the pin at the top of the extinguisher that keeps the handle from being accidentally pressed.

    Kia Soul (SK3) 2020-2025 Owners Manual: Side repeater lamp (Bulb type) bulb replacement

    1. Remove the lamp assembly from the vehicle by prying the lens and pulling the assembly out. 2. Disconnect the bulb electrical connector. 3. Separate the socket and the lens parts by turning the socket counterclockwise until the tabs on the socket align with the slots on the lens part.

    Categories

     
    Copyright © 2026 www.ksoulsk3.com - 0.0169