
O / CANCEL : Cancels Cruise Control system operation.
/ CRUISE : Turns Cruise Control
system system on or off.
RES+ : Resumes or increases cruise control speed.
SET- : Sets or decreases cruise control speed.
Cruise Control system allows you to program the vehicle to maintain a constant speed without pressing the accelerator pedal. This system is designed to function above approximately 30 km/h (20 mph).
1. Press the cruise /CRUISE button on the steering wheel, to turn the system on. The cruise indicator light will illuminate. 2. Accelerate to the desired speed, which must be more than 30 km/h (20 mph).
1. Turn the ignition switch and all other switches off. 2. Remove the fuse panel cover by pressing the tab and pulling the cover up. When the blade type fuse is disconnected, remove it by using the clip designed for changing fuses located in the engine room fuse box.
Please prepare bulbs with appropriate standards in case of emergencies (Refer to “Bulb wattage” on page 9-07 for further information). When changing bulbs and sorts, first turn off the engine at a safe place, firmly apply the side brake and take out the battery's negative (-) terminal.