Kia Soul (SK3): Lane Keeping Assist (LKA) system / LKA system malfunction

Kia Soul. LKA system malfunction

• If there is a problem with the system a message will appear. If the problem continues LKA system fail indicator will illuminate.

LKA system fail indicator

LKA system fail indicator (yellow) will illuminate with an audible warning if LKA system is not working properly. In this case, have the system checked by a professional workshop. Kia recommends to visit an authorized Kia dealer/ service partner.

When there is a problem with the system do one of the following:

  • Turn the system on after turning the vehicle off and on again.
  • Check if the engine start/stop button is in the ON position.
  • Check if the system is affected by the weather. (ex: fog, heavy rain, etc.)
  • Check if there is foreign matter on the camera lens.

If the problem is not solved, have the system checked by a professional workshop. Kia recommends to visit an authorized Kia dealer/service partner.

    The driver must be cautious in the below situations may not work properly when recognition of the lane marker is poor or limited : When lane and road condition is poor It is difficult to distinguish the lane marker or road edge from road when the lane marker or road edge is covered with dust or sand.

    The driver can change LKA to Lane Departure Warning (LDW) or change LKA mode from the User Settings Mode on the LCD display. Lane keeping assist LKA mode guides the driver to keep the vehicle within the lanes.

    Other information:

    Kia Soul (SK3) 2020-2025 Owners Manual: Tire sidewall labeling

    This information identifies and describes the fundamental characteristics of the tire and also provides the tire identification number (TIN) for safety standard certification. The TIN can be used to identify the tire in case of a recall. 1. Manufacturer or brand name Manufacturer or Brand name is shown.

    Kia Soul (SK3) 2020-2025 Owners Manual: Tail lamp / Back up lamp bulb replacement (Rear combination lamp Type A)

    1. Open the tailgate. 2. Remove the service cover. (Loosen the lamp assembly retaining screws and remove the lamp assembly from the body of the vehicle for back-up lamp) 3. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly.

    Categories

     
    Copyright © 2026 www.ksoulsk3.com - 0.014