Kia Soul (SK3): Forward Collision-Avoidance Assist (FCA) system (Camera type) / System malfunction

Kia Soul. System malfunction

  • When FCA is not working properly, FCA warning light (Kia Soul. System malfunction) will illuminate and the warning message will appear for a few seconds. After the message disappears, the master warning light (Kia Soul. System malfunction) will illuminate. In this case, have the vehicle inspected by a professional workshop. Kia recommends to visit an authorized Kia dealer/service partner.
  • FCA warning message may appear along with the illumination of the ESC warning light.

WARNING

  • FCA is only a supplemental system for the driver’s convenience. The driver should hold the responsibility to control the vehicle operation. Do not solely depend on FCA system. Rather, maintain a safe braking distance, and, if necessary, depress the brake pedal to lower the driving speed.
  • In certain instances and under certain driving conditions, FCA system may activate unintentionally. Also, in certain instances the front camera recognition system may not detect the vehicle ahead. FCA system may not activate and the warning message will not be displayed.
  • FCA may unnecessarily produce the warning message and the warning alarms. Also, due to the sensing limitation, FCA may not produce the warning message and the warning alarm at all.
  • When there is a malfunction with FCA, the braking control does not operate upon detecting a collision risk even with other braking systems normally operating.
  • FCA operates only for the vehicle in front, while driving forward. It does not operate for any animals or vehicles in the opposite direction.
  • FCA does not recognize the vehicle, which horizontally drives across the crossroad, or the vehicle, which is parked in the horizontal direction.
  • If the vehicle in front stops suddenly, you may have less control of the brake system. Therefore, always keep safe distance between your vehicle and the vehicle in front of you.
  • FCA system may activate during braking and the vehicle may stop suddenly. And the load in the vehicle may endanger passengers. Therefore, always be mindful of the load volume in the vehicle.
  • FCA system may not activate if the driver applies the brake pedal to avoid risk of collision before FCA operation.
  • FCA system does not operate when the vehicle is in reverse. In these cases, you must maintain a safe braking distance, and if necessary, depress the brake pedal to reduce the driving speed in order to maintain a safe distance.
  • The regular braking function will operate normally even if there is a problem with FCA brake control system or other functions. In this case, the braking control will not operate in the risk of a collision.
  • FCA system may not activate according to driving condition, traffic on the road, weather, road condition, etc.
  • FCA system may not activate to all types of vehicles.

    In order for FCA system to operate properly, always make sure the sensor is clean and free of dirt, snow, and debris. Dirt, snow, or foreign substances on the lens may adversely affect the sensing performance of the sensor.

    FCA is an assistant system for a driver in a certain risky driving condition and it does not take every responsibility for all risks from driving condition.

    Other information:

    Kia Soul (SK3) 2020-2025 Owners Manual: If you have a flat tire (with Tire Mobility Kit)

    Please read the instructions before using the Tire Mobility Kit. 1. Sealant bottle 2. Compressor The Tire Mobility Kit is a temporary fix to the tire and we recommend that the tire inspected by an authorized Kia dealer as soon as possible. CAUTION One sealant for one tire When two or more tires are flat, do not use the tire mobility kit

    Kia Soul (SK3) 2020-2025 Owners Manual: Tail lamp / Back up lamp bulb replacement (Rear combination lamp Type A)

    1. Open the tailgate. 2. Remove the service cover. (Loosen the lamp assembly retaining screws and remove the lamp assembly from the body of the vehicle for back-up lamp) 3. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly.

    Categories

     
    Copyright © 2025 www.ksoulsk3.com - 0.0092