
To remove the cover :
1. Pull out the door handle.
2. Press the lever (1) located inside the bottom part of the cover with a key or flat-head screwdriver.
3. Push out the cover (2) while pressing the lever.
CAUTION
Be careful not to damage the cover while removing it or misplace it after removing it.
NOTICE
WARNING
WARNING
If people must spend a longer time in the vehicle while it is very hot or cold outside, there is risk of injuries or danger to life. Do not lock the vehicle from the outside when there are people in it.
CAUTION
Do not frequently repeat opening and closing of doors, or apply excessive force to a door while the door closer is operating.
With the door lock button To unlock a door, push the door lock button (1) to the “Unlock” position. The red mark on the handle will be visible.
1. Open the tailgate. 2. Loosen the lamp assembly retaining screws with a screwdriver. 3. Remove the rear combination lamp assembly from the body of the vehicle. 4. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly.
1. Using a flat-blade screwdriver, gently pry the lens cover from lamp housing. 2. Remove the bulb by pulling it straight out. 3. Install a new bulb in the socket. 4. Align the lens cover tabs with the lamp housing notches and snap the lens into place.