Resetting the system

System disabled
Driver Attention Warning system enters the ready status and displays the 'Disabled' screen in the following situations.
- The camera sensor keeps failing to detect the lanes.
- Driving speed remains over 180 km/h.
System setting Driver Attention Warning system is set to be in the normal sensitivity, when your vehicle is first delivered to you from the factory.
When the "Check System" warning message appears, the system is not working properly. In this case, have the system checked by a professional workshop.
The wheels on your vehicle were aligned and balanced carefully at the factory to give you the longest tire life and best overall performance. In most cases, you will not need to have your wheels aligned again. However, if you notice unusual tire wear or your vehicle pulling one way or the other, the alignment may need to be reset.
1. Remove the lamp assembly from the vehicle by prying the lens and pulling the assembly out. 2. Disconnect the bulb electrical connector. 3. Separate the socket and the lens parts by turning the socket counterclockwise until the tabs on the socket align with the slots on the lens part.