Kia Soul: Features of your vehicle / Sunroof

If your vehicle is equipped with a sunroof, you can slide or tilt your sunroof
with the sunroof control lever located on the overhead console.
The sunroof can be operated for approximately 10 minutes after the engine start/stop
button is turned to the ACC or LOCK position. However, if the front doors are opened,
the sunroof cannot be opened even within the 10 minutes period.
NOTICE
- In cold and wet climates, the sunroof may not work properly due to
freezing conditions.
- After a vehicle is washed or in a rainstorm be sure to wipe off any
water that is on the sunroof before operating it.
CAUTION
- Do not continue to move the sunroof control lever after the sunroof
is fully opened, closed, or tilted. Damage to the motor or system components
could occur.
- Make sure the sunroof is closed fully when leaving your vehicle. If
the sunroof is open, rain or snow may leak through the sunroof and wet the interior
as well as cause theft.
NOTICE
The sunroof cannot slide when it is in the tilt position nor can it be tilted
while in an open or slide position.
WARNING
Never adjust the sunroof or sunshade while driving. This could result in loss
of control and an accident that may cause death, serious injury, or property damage.
WARNING
- In order to prevent accidental operation of the sunroof, especially
by a child, do not let a child operate the sunroof.
- Do not sit on the top of the vehicle. It may cause vehicle damage.
Opening the fuel filler door The fuel filler door must be opened from inside the vehicle by pulling up on the fuel filler door opener located on the front floor area on the driver’s seat. NOTICE If the ...
To open the sunroof, push the sunroof control lever backward. To close the sunroof, push the sunroof control lever forward. To open the sunroof automatically: Pull the sunroof control lever backward to ...
Other information:
Adjusting instrument cluster illumination WARNING Never adjust the instrument cluster while driving. This could result in loss of control and lead to an accident that may cause death, serious injury, or property damage. The brightness of the instrument panel illumination is changed by pressing the illumination ...
1. Start the engine. 2. Set the mode to the desired position. For improving the effectiveness of heating and cooling; - Heating: - Cooling: 3. Set the temperature control to the desired position. 4. Set the air intake control to the outside (fresh) air position. 5. Set the fan speed control to the desired ...