Kia Soul: Electronic stability control (ESC) / ESC OFF usage

Kia Soul (SK3) 2020-2022 Owners Manual / Driving your vehicle / Brake system / Electronic stability control (ESC) / ESC OFF usage

When driving

ESC should be turned on for daily driving whenever possible.
To turn ESC off while driving, press the ESC OFF button while driving on a flat road surface.

Never press the ESC OFF button while ESC is operating (ESC indicator light blinks).

If ESC is turned off while ESC is operating, the vehicle may slip out of control.

NOTICE

When operating the vehicle on a dynamometer, ensure that the ESC is turned off (ESC OFF light illuminated).
Turning the ESC off does not affect ABS or brake system operation.

WARNING

Never press the ESC OFF button while ESC is operating.

If the ESC is turned off while ESC is operating, the vehicle may go out of control.

To turn ESC off while driving, press the ESC OFF button while driving on a flat road surface.

Indicator light

When ignition switch is turned to ON, the indicator light illuminates, then goes off if the ESC system is operating normally. The ESC indicator light blinks whenever ESC is operating or illuminates when ...

Hill-start assist control (HAC)

Hill start Assist Control is a comfort function. The main intend is to prevent the vehicle from rolling backwards while driving off uphill on an inclined surface. HAC holds the braking pressure builtup ...

Other information:

Kia Soul (SK3) 2020-2022 Owners Manual: Hood

Opening the hood Pull the release lever to unlatch the hood. The hood should pop open slightly. WARNING Open the hood after turning off the engine on a flat surface, shifting the shift lever to the P (Park) position for Automatic Transmission/Dual Clutch Transmission/Intelligent Variable Transmission ...

Kia Soul (SK3) 2020-2022 Owners Manual: Room lamp (Bulb type) bulb replacement

WARNING Prior to working on the Interior lamps, ensure that the “OFF” button is depressed to avoid burning your fingers or receiving an electric shock. 1. Using a flat-blade screwdriver, gently pry the lens cover from lamp housing. 2. Remove the bulb by pulling it straight out. 3. Install a new ...