Low aspect ratio tires, whose aspect ratio is lower than 50, are provided for sporty looks.
Because the low aspect ratio tires are optimized for handling and braking, it may be more uncomfortable to ride in and there is more noise compare with normal tires.
CAUTION
Because the sidewall of the low aspect ratio tire is shorter than the normal, the wheel and tire of the low aspect ratio tire is easier to be damaged. So, follow the instructions below.
- When driving on a rough road or off road, drive cautiously because tires
and wheels may be damaged. And after driving, inspect tires and wheels.
- When passing over a pothole, speed bump, manhole or curb stone, drive slowly so
that the tires and wheels are not damaged.
- If the tire is impacted, we recommend that you inspect the tire condition or contact
an authorized Kia dealer.
- To prevent damage to the tire, inspect the tire condition and pressure every 3,000
km.
- It is not easy to recognize the tire damage with your own eyes. But if there is
the slightest hint of tire damage, even though you cannot see the tire damage with
your own eyes, have the tire checked or replaced because the tire damage may cause
air leakage from the tire.
- If the tire is damaged by driving on a rough road, off road, pothole, manhole,
or curb stone, it will not be covered by the warranty.
- You can find out the tire information on the tire sidewall.
This information identifies and describes the fundamental characteristics of the tire and also provides the tire identification number (TIN) for safety standard certification.
❈ Left side : Normal, Right side : Blown A vehicle’s electrical system is protected from electrical overload damage by fuses. This vehicle has 2 (or 3) fuse panels, one located in the driver’s side panel bolster, the others in the engine compartment near the battery.
1. Remove the lamp assembly from the vehicle by prying the lens and pulling the assembly out. 2. Disconnect the bulb electrical connector. 3. Separate the socket and the lens parts by turning the socket counterclockwise until the tabs on the socket align with the slots on the lens part.
WARNING Prior to working on the Interior lamps, ensure that the “OFF” button is depressed to avoid burning your fingers or receiving an electric shock. 1. Using a flat-blade screwdriver, gently pry the lens cover from lamp housing. 2. Remove the bulb by pulling it straight out.