Kia Soul (SK3): LCD display for transmission temperature and warning message / Paddle shifter

Kia Soul. Paddle shifter

The paddle shift function is available when the shift lever is in the D (Drive) position or the manual mode.

With the shift lever in the D position The paddle shift function will operate when the vehicle speed is more than 10km/h.

Pull the [+] or [-] paddle shifter once to shift up or down one gear and the system changes from automatic mode to manual mode.

When the vehicle speed is lower than 10km/h, if you depress the accelerator pedal for more than 5 seconds or if you shift the shift lever from D (Drive) to manual mode and shift it from manual mode to D (Drive) again, the system changes from manual mode to automatic mode.

With the shift lever in the manual mode Pull the [+] or [-] paddle shifter once to shift up or down one gear.

NOTICE

If you pull the [+] and [-] paddle shifters at the same time, you cannot shift the gear.

    The indicator in the instrument cluster displays the shift lever position when the ignition switch is in the ON position. P (Park) Always come to a complete stop before shifting into P (Park).

    For your safety, the automatic transaxle has a shift lock system which prevents shifting the transaxle from P (Park) into R (Reverse) unless the brake pedal is depressed.

    Other information:

    Kia Soul (SK3) 2020-2025 Owners Manual: Changing a tire with TPMS

    If you have a flat tire, the low Tire Pressure and Position telltales will come on. In this case, have the system checked by a professional workshop. Kia recommends to visit an authorized Kia dealer/service partner. CAUTION We recommend that you use the sealant approved by Kia.

    Kia Soul (SK3) 2020-2025 Owners Manual: Tail lamp / Back up lamp bulb replacement (Rear combination lamp Type A)

    1. Open the tailgate. 2. Remove the service cover. (Loosen the lamp assembly retaining screws and remove the lamp assembly from the body of the vehicle for back-up lamp) 3. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly.

    Categories

     
    Copyright © 2026 www.ksoulsk3.com - 0.0115