
The temperature setting of the seat changes according to the switch position.
• If you want to warm your seat cushion, press the switch (red color). • If you want to cool your seat cushion, press the switch (blue color). • Each time you press the button, the airflow will change as follows: • The seat warmer (with air ventilation) defaults to the OFF position whenever the ignition switch is turned on.
CAUTION
When cleaning the seats, do not use an organic solvent such as paint thinner, benzene, alcohol and gasoline. Doing so may damage the surface of the heater or seats.
The seat warmer is provided to warm the front seats during cold weather. With the ignition switch in the ON position, push either of the switches to warm the driver's seat or the front passenger's seat.
The power outlet is designed to provide power for mobile telephones or other devices designed to operate with vehicle electrical systems. The devices should draw less than 10 amps with the engine running.
For best battery service Keep the battery securely mounted. Keep the battery top clean and dry. Keep the terminals and connections clean, tight, and coated with petroleum jelly or terminal grease. Rinse any spilled electrolyte from the battery immediately with a solution of water and baking soda.
Headlamp aiming Front fog lamp aiming 1. Horizontal aiming 2. Vertical aiming 3. Low vertical aiming 4. High vertical aiming 5. Vertical aiming (Front) 6. Vertical aiming (Low) 1. Inflate the tires to the specified pressure and remove any loads from the vehicle except the driver, spare tire, and tools.