
)
will illuminate and the warning message will appear for a few seconds. After
the message disappears, the master warning light (
)
will illuminate. In this case, have the vehicle inspected by a professional
workshop. Kia recommends to visit an authorized Kia dealer/service partner.WARNING
In order for FCA system to operate properly, always make sure the sensor cover or sensor is clean and free of dirt, snow, and debris. Dirt, snow, or foreign substances on the lens may adversely affect the sensing performance of the sensor.
FCA is an assistant system for a driver in a certain risky driving condition and it does not take every responsibility for all risks from driving condition.
1. Using a flat-blade screwdriver, gently pry the lamp assembly from interior. 2. Remove the bulb by pulling it straight out. 3. Install a new bulb in the socket. 4. Install the lamp assembly to interior. CAUTION Be careful not to dirty or damage the lens, lens tab, and plastic housings.
Interior general precautions Prevent chemicals such as perfume, cosmetic oil, sun cream, hand cleaner, and air freshener from contacting the interior parts because they may cause damage or discoloration. If they do contact the interior parts, wipe them off immediately.