
Follow either of these procedures:
To temporarily accelerate with Cruise Control system on:
If you want to speed up temporarily when the cruise control is on, depress the accelerator pedal. Increased speed will not interfere with cruise control operation or change the set speed.
To return to the set speed, take your foot off the accelerator pedal.
Follow either of these procedures: Push the button (RES+) and hold it. Your vehicle will accelerate. Release the button at the speed you want.
Depress the brake pedal. Depress the clutch pedal if equipped with a manual transaxle. Press the O/CANCEL switch located on the steering wheel.
1. After driving approximately 7~10 km ( 4~6 miles or about 10 minutes), stop at a suitable location. 2. Connect connection hose (10) of the compressor directly to the tire valve. 3. Connect between compressor and the vehicle power outlet using the cable and connectors.
Please prepare bulbs with appropriate standards in case of emergencies (Refer to “Bulb wattage” on page 9-07 for further information). When changing bulbs and sorts, first turn off the engine at a safe place, firmly apply the side brake and take out the battery's negative (-) terminal.