
Follow either of these procedures:
1. Press the cruise /CRUISE button on the steering wheel, to turn the system on. The cruise indicator light will illuminate. 2. Accelerate to the desired speed, which must be more than 30 km/h (20 mph).
Follow either of these procedures: Push the button (SET-) and hold it. Your vehicle will gradually slow down. Release the button at the speed you want to maintain.
If the engine doesn't turn over or turns over slowly 1. Check the battery connections to be sure they are clean and tight. 2. Turn on the interior light. If the light dims or goes out when you operate the starter, the battery is discharged. 3.
You can check the tire pressure in the assist mode on the cluster. - Refer to “LCD mode” on page 4-54. Tire pressure is displayed 1~2 minutes later after driving. If tire pressure is not displayed when the vehicle is stopped, “Drive to display” message displays.