Kia Soul: Lane Keeping Assist (LKA) system / LKA system malfunction

Kia Soul (SK3) 2020-2021 Owners Manual / Driving your vehicle / Lane Keeping Assist (LKA) system / LKA system malfunction

Kia Soul. LKA system malfunction

• If there is a problem with the system a message will appear. If the problem continues LKA system fail indicator will illuminate.

LKA system fail indicator

LKA system fail indicator (yellow) will illuminate with an audible warning if LKA system is not working properly. In this case, have the system checked by a professional workshop. Kia recommends to visit an authorized Kia dealer/ service partner.

When there is a problem with the system do one of the following:

Turn the system on after turning the vehicle off and on again.
Check if the engine start/stop button is in the ON position.
Check if the system is affected by the weather. (ex: fog, heavy rain, etc.)
Check if there is foreign matter on the camera lens.

If the problem is not solved, have the system checked by a professional workshop. Kia recommends to visit an authorized Kia dealer/service partner.

Driver's attention

The driver must be cautious in the below situations may not work properly when recognition of the lane marker is poor or limited : When lane and road condition is poor It is difficult to distinguish the ...

LKA system function change

The driver can change LKA to Lane Departure Warning (LDW) or change LKA mode from the User Settings Mode on the LCD display. Lane keeping assist LKA mode guides the driver to keep the vehicle within the ...

Other information:

Kia Soul (SK3) 2020-2021 Owners Manual: Front seat adjustment - power

The driver’s seat can be adjusted by using the control switches located on the outside of the seat cushion. Before driving, adjust the seat to the proper position so as to easily control the steering wheel, pedals and switches on the instrument panel. WARNING The power seat is operable with the ignition ...

Kia Soul (SK3) 2020-2021 Owners Manual: System operation

Ventilation 1. Set the mode to the position. 2. Set the air intake control to the outside (fresh) air position. 3. Set the temperature control to the desired position. 4. Set the fan speed control to the desired speed. Heating 1. Set the mode to the position. 2. Set the air intake control to the outside ...