Kia Soul: Scheduled maintenance service / Maintenance Under Severe Usage Conditions - For Gasoline Engine
Maintenance operation
I: Inspect and if necessary, adjust, correct, clean or replace.
R: Replace or change.
SEVERE DRIVING CONDITIONS
A: Repeatedly driving short distance of less than 8 km (5 miles) in normal temperature
or less than 16 km (10 miles) in freezing temperature.
B: Extensive engine idling or low speed driving for long distances.
C: Driving on rough, dusty, muddy, unpaved, graveled or salt-spread roads.
D: Driving in areas using salt or other corrosive materials or in very cold weather.
E: Driving in heavy dust condition.
F: Driving in heavy traffic area.
G: Driving on uphill, downhill, or mountain roads repeatedly.
H: Towing a trailer or using a camper on roof rack.
I: Driving for patrol car, taxi, other commercial use of vehicle towing.
J: Driving over 170 km/h (106 mile/h).
K: Frequently driving in stop-and-go conditions.
Normal Maintenance Schedule - For Gasoline Engine
The following maintenance services must be performed to ensure good emission control and performance. Keep receipts for all vehicle emission services to protect your warranty. Where both mileage and time ...
Explanation of scheduled maintenance items
Engine oil and filter The engine oil and filter should be changed at the intervals specified in the maintenance schedule. If the car is being driven in severe conditions, more frequent oil and filter changes ...
Other information:
Kia Soul (SK3) 2020-2021 Owners Manual: DCT warning messages
This warning message is displayed when vehicle is driven slowly on a grade and the vehicle detects that the brake pedal is not applied. Steep grade Driving up hills or on steep grades: To hold the vehicle on an incline use the foot brake or the parking brake. When in stop-and-go traffic on an incline, ...
Kia Soul (SK3) 2020-2021 Owners Manual: Non-operational conditions of Reverse Parking Distance Warning system
Reverse Parking Distance Warning system may not operate properly when: 1. Moisture is frozen to the sensor. (It will operate normally when the moisture has been cleared.) 2. The sensor is covered with foreign matter, such as snow or water, or the sensor cover is blocked. (It will operate normally when ...