
)
will illuminate and the warning message will appear for a few seconds. After
the message disappears, the master warning light (
)
will illuminate. In this case, have the vehicle inspected by a professional
workshop. Kia recommends to visit an authorized Kia dealer/service partner.WARNING
In order for FCA system to operate properly, always make sure the sensor cover or sensor is clean and free of dirt, snow, and debris. Dirt, snow, or foreign substances on the lens may adversely affect the sensing performance of the sensor.
FCA is an assistant system for a driver in a certain risky driving condition and it does not take every responsibility for all risks from driving condition.
Checking the brake/clutch fluid level Check the fluid level in the reservoir periodically. The fluid level should be between MAX and MIN marks on the side of the reservoir. Before removing the reservoir cap and adding brake/clutch fluid, clean the area around the reservoir cap thoroughly to prevent brake/clutch fluid contamination.
1. Open the tailgate. 2. Loosen the lamp assembly retaining screws with a screwdriver. 3. Remove the rear combination lamp assembly from the body of the vehicle. 4. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly.