Kia Soul: Light bulbs / Tail lamp / Back up lamp bulb replacement (Rear combination lamp Type A)
1. Open the tailgate.
2. Remove the service cover. (Loosen the lamp assembly retaining screws and remove the lamp assembly from the body of the vehicle for back-up lamp)
3. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly.
4. Remove the bulb from the socket by pressing it in and rotating it counter-clockwise until the tabs on the bulb align with the slots in the socket. Pull the bulb out of the socket.
5. Insert a new bulb by inserting it into the socket and rotating it until it locks into place.
6. Install the socket in the assembly by aligning the tabs on the socket with the slots in the assembly. Push the socket into the assembly and turn the socket clockwise.
7. Install the service cover by putting it into the service hole.
Stop/tail and turn signal lamp (Bulb type) bulb replacement (Rear combination
lamp Type A)
1. Open the tailgate. 2. Loosen the lamp assembly retaining screws with a screwdriver. 3. Remove the rear combination lamp assembly from the body of the vehicle. 4. Remove the socket from the assembly ...
Rear fog lamp (Bulb type) bulb replacement
If the Headlamp (High/Low) (1) does not operate, have your vehicle checked by a professional workshop. Kia recommends to visit an authorized Kia dealer/ service partner. ...
Other information:
Kia Soul (SK3) 2020-2023 Owners Manual: Windows
1. Driver’s door power window switch 2. Front passenger’s door power window switch 3. Rear door (left) power window switch 4. Rear door (right) power window switch 5. Window opening and closing 6. Automatic power window up*/ down* 7. Power window lock switch NOTICE In cold and wet climates, power ...
Kia Soul (SK3) 2020-2023 Owners Manual: High mounted stop lamp (bulb type) bulb replacement
1. Open the tailgate. 2. Remove the cover. 3. Loosen the retaining bolts and remove the hose (1). 4. Pull out the module from the high mounted stop lamp assembly by pulling both clips. 5. Replace the bulbs by pulling it out. 6. Reinstall in the reverse order. ...
