

During uphill or downhill driving, Smart Cruise Control system may not detect a moving vehicle in your lane, and cause your vehicle to accelerate to the set speed.
Some vehicles ahead in your lane cannot be recognized by the sensor as follows: - Narrow vehicles such as motorcycles or bicycles - Vehicles offset to one side - Slow-moving vehicles or sudden-decelerating vehicles - Stopped vehicles - Vehicles with small rear profile such as trailers with no loads A vehicle ahead cannot be recognized correctly by the sensor if any of following occurs: - When the vehicle is pointing upwards due to overloading in the trunk(tailgate) - While making turns by steering - When driving to one side of the lane - When driving on narrow lanes or on curves Adjust your vehicle speed by depressing the brake pedal according to the road condition ahead and driving condition.
If the engine doesn't turn over or turns over slowly 1. Check the battery connections to be sure they are clean and tight. 2. Turn on the interior light. If the light dims or goes out when you operate the starter, the battery is discharged. 3.
If you have a flat tire, the low Tire Pressure and Position telltales will come on. In this case, have the system checked by a professional workshop. Kia recommends to visit an authorized Kia dealer/service partner. CAUTION We recommend that you use the sealant approved by Kia.