Kia Soul: Heating and air conditioning / Temperature control, Max A/C selection

Kia Soul (SK3) 2020-2024 Owners Manual / Features of your vehicle / Manual climate control system / Heating and air conditioning / Temperature control, Max A/C selection

Temperature control

Kia Soul. Temperature control, Max A/C selection

The temperature control knob allows you to control the temperature of the air flowing from the ventilation system. To change the air temperature in the passenger compartment, turn the knob to the right position for warm and hot air or left position for cooler air.

Max A/C selection

Kia Soul. Temperature control, Max A/C selection

To operate the MAX A/C, turn the temperature knob to extreme left. Air flow is directed toward the upper body and face.

In this mode, the air conditioning and the recirculated air position will be selected automatically.

Mode selection

The mode selection knob controls the direction of the air flow through the ventilation system. Air can be directed to the floor, dashboard outlets, or windshield. Five symbols are used to represent Face, ...

Air intake control

The air intake control is used to select the outside (fresh) air position or recirculated air position. To change the air intake control position, press the control button. Recirculated air position With ...

Other information:

Kia Soul (SK3) 2020-2024 Owners Manual: BCW (Blind-Spot Collision Warning) (if equipped)

Operating conditions The indicator on the switch will illuminate when the BCW button is pressed with the engine start/stop button ON. If the vehicle speed exceeds 30 km/h (18.6 mph), the system will activate. If you press the button again, the switch indicator and system will be turned off. If the engine ...

Kia Soul (SK3) 2020-2024 Owners Manual: Room lamp (Bulb type) bulb replacement

WARNING Prior to working on the Interior lamps, ensure that the “OFF” button is depressed to avoid burning your fingers or receiving an electric shock. 1. Using a flat-blade screwdriver, gently pry the lens cover from lamp housing. 2. Remove the bulb by pulling it straight out. 3. Install a new ...