
Follow either of these procedures:
1. Press the cruise /CRUISE button on the steering wheel, to turn the system on. The cruise indicator light will illuminate. 2. Accelerate to the desired speed, which must be more than 30 km/h (20 mph).
Follow either of these procedures: Push the button (SET-) and hold it. Your vehicle will gradually slow down. Release the button at the speed you want to maintain.
1. Detach the speed restriction label (1) from the sealant bottle (2), and place it in a highly visible place inside the vehicle such as on the steering wheel to remind the driver not to drive too fast. 2. Screw connection hose (10) onto the connector of the sealant bottle.
1. Open the tailgate. 2. Remove the cover. 3. Loosen the retaining bolts and remove the hose (1). 4. Pull out the module from the high mounted stop lamp assembly by pulling both clips. 5. Replace the bulbs by pulling it out. 6. Reinstall in the reverse order.