
If the high mounted stop lamp (LED) (1), does not operate, have your vehicle checked by a professional workshop. Kia recommends to visit an authorized Kia dealer/service partner.
The LED lamps cannot be replaced as a single unit because it is an integrated unit. The LED lamps has to be replaced with the unit.
A skilled technician should check or repair the high mounted stop lamp (LED), for it may damage related parts of the vehicle.
If the stop and tail lamp (LED) (1,2), does not operate, have your vehicle checked by a professional workshop. Kia recommends to visit an authorized Kia dealer/service partner.
1. Open the tailgate. 2. Remove the cover. 3. Loosen the retaining bolts and remove the hose (1). 4. Pull out the module from the high mounted stop lamp assembly by pulling both clips.
Connect cables in numerical order and disconnect in reverse order. Jump starting Jump starting can be dangerous if done incorrectly. Therefore, to avoid harm to yourself or damage to your vehicle or battery, follow the jump starting procedures. If in doubt, we strongly recommend that you have a competent technician or towing service jump
Jack and tools The jack, jack handle, wheel lug nut wrench are stored in the luggage compartment. Pull up the luggage box cover to reach this equipment. 1. Jack handle 2. Jack 3. Wheel lug nut wrench Jacking instructions The jack is provided for emergency tire changing only.