Kia Soul (SK3): Maintenance / Air cleaner

Filter replacement

Kia Soul. Air cleaner

It must be replaced when necessary, and should not be washed.

You can clean the filter when inspecting the air cleaner element.

Clean the filter by using compressed air.

Kia Soul. Air cleaner

1. Loosen the air cleaner cover attaching clips and open the cover.

Kia Soul. Air cleaner

2. Wipe the inside of the air cleaner.

3. Replace the air cleaner filter.

4. Lock the cover with the cover attaching clips.

Replace the filter according to the Maintenance Schedule.

If the vehicle is operated in extremely dusty or sandy areas, replace the element more often than the usual recommended intervals. (Refer to “Maintenance under severe usage conditions” on page 8-16.)

CAUTION

  • Do not drive with the air cleaner removed; this will result in excessive engine wear.
  • When removing the air cleaner filter, be careful that dust or dirt does not enter the air intake, or damage may result.
  • Use parts for replacement from a professional workshop. Kia recommends to visit an authorized Kia dealer/service partner.

    Checking the parking brake Check the stroke of the parking brake by counting the number of “clicks’’ heard while fully applying it from the released position.

    Filter inspection If the vehicle is operated in the severely air-polluted cities or on dusty rough roads for a long period, it should be inspected more frequently and replaced earlier.

    Other information:

    Kia Soul (SK3) 2020-2025 Owners Manual: Removing and storing the spare tire

    Turn the tire hold-down wing bolt counterclockwise to remove. Store the tire in the reverse order of removal. To prevent the spare tire and tools from “rattling” while the vehicle is in motion, store them properly. WARNING Ensure the spare tire retainer is properly aligned with the center of the spare tire to prevent the spare tire f

    Kia Soul (SK3) 2020-2025 Owners Manual: High mounted stop lamp (bulb type) bulb replacement

    1. Open the tailgate. 2. Remove the cover. 3. Loosen the retaining bolts and remove the hose (1). 4. Pull out the module from the high mounted stop lamp assembly by pulling both clips. 5. Replace the bulbs by pulling it out. 6. Reinstall in the reverse order.

    Categories

     
    Copyright © 2026 www.ksoulsk3.com - 0.0075