Kia Soul (SK3): Automatic climate control system / Climate control air filter

Kia Soul. Climate control air filter

A : Outside air
B : Recirculated air
C : Climate control air filter
D : Blower
E : Evaporator core
F : Heater core

The climate control air filter installed behind the glove box filters the dust or other pollutants that come into the vehicle from the outside through the heating and air conditioning system.

If dust or other pollutants accumulate in the filter over a period of time, the air flow from the air vents may decrease, resulting in moisture accumulation on the inside of the windshield even when the outside (fresh) air position is selected. If this happens, have the climate control air filter replaced by a professional workshop. Kia recommends to visit an authorized Kia dealer/ service partner.

NOTICE

  • Replace the filter according to the Maintenance Schedule. If the vehicle is being driven in severe conditions such as dusty or rough roads, more frequent air conditioner filter inspections and changes are required. • When the air flow rate suddenly decreases, have the system checked by a professional workshop. Kia recommends to visit an authorized Kia dealer/service partner.

    Ventilation 1. Set the mode to the position. 2. Set the air intake control to the outside (fresh) air position. 3. Set the temperature control to the desired position.

    Each symbols and specification on air conditioning refrigerant label means as below; 1. Classification of refrigerant 2. Amount of refrigerant 3.

    Other information:

    Kia Soul (SK3) 2020-2025 Owners Manual: Removing and storing the spare tire

    Turn the tire hold-down wing bolt counterclockwise to remove. Store the tire in the reverse order of removal. To prevent the spare tire and tools from “rattling” while the vehicle is in motion, store them properly. WARNING Ensure the spare tire retainer is properly aligned with the center of the spare tire to prevent the spare tire f

    Kia Soul (SK3) 2020-2025 Owners Manual: Map lamp (Bulb type) bulb replacement

    WARNING Prior to working on the Interior lamps, ensure that the “OFF” button is depressed to avoid burning your fingers or receiving an electric shock. 1. Using a flat-blade screwdriver, gently pry the lens cover from lamp housing. 2. Remove the bulb by pulling it straight out.

    Categories

     
    Copyright © 2026 www.ksoulsk3.com - 0.0174